COB LED Waterproof Solar Sensor Light With Remote Control (ZB-168B)
ZB-168 model solar wall lamp projector or solar induction wall lamp is made of solar lights connected to the panel.
The mentioned solar wall lamp has 8 parts with cob lights that have good lighting.
The solar panel of this product is installed on its back and is charged during the day by light, so it is suitable for outdoor use.
The high exposure of these projectors has made it possible to light up to about 30 to 40 square meters. However, for higher light efficiency, it should be installed at a height of more than 3 meters.
The function of this solar wall light is automatic and it is charged during the day and turns on automatically at night.
The presence of the RIP Motion sensor has caused it to turn on in mode number 1 and 2 when objects move in front of it.
The exposure modes of this solar projector can be changed using the control built into the device or the button on the device.
This product has three types of lighting modes.
Mode 1: Operation at night and lighting up with the movement of objects at a distance of 3 to 5 meters for 15 seconds.
Mode 2: lighting with 30% light power permanently at night and the movement of objects within 5 meters causes the full capacity of the device to be turned on for 15 seconds.
Mode 3: turning on with 70% of its capacity and keeping its light constant at night (disabling the motion sensor)
Its motion sensor can detect the movement of objects up to 5 meters away at night (of course, it also depends on the way and height of its installation).
This product has an IP65 certificate, which is resistant to rain and moisture, and you can easily install it outdoors.
It has two AA size 3.7 volt rechargeable batteries to supply energy inside the device.